FORESTRY ACCESSORIES

EARMUFFS ARE SOLD INDIVIDUALLY DESCRIPTION The patented hearing protection of the PROTOS® Integral provides a noise reduction of SNR=27 dB, thus creating a safe level. By meeting the standard EN 352-3, the hearing protection is indispensable for all work with disruptive or harmful noise. If the hearing protection is not required, it can be easily shifted between the active and passive positions using two fingers. The hearing protectors can be (un)clipped easily with two fingers. To maintain the noise absorption values, the Absorption Inserts (Item 204059) should be replaced every 2–3 years and the Support Pad (Item 204062) should be replaced every six months for daily use. FEATURES Integrated clipping system for the PROTOS® Integral Helmets, “fold back” into helmet shell – no external hang up Down force/clamp pressure adjustable (5 settings on each ear muff – factory set at minimum clamp force) Ear position in cradle is adjustable Certified EN352-3 HPD exceeds Class 5 with an SNR rating of 27 Communications options available Replacement hygiene kits available Ear Muffs are sold individually

DESCRIPTION The neck protection for the PROTOS® Integral is available in different colours. All variants of the neck protection for the PROTOS® Integral are made ​​of high-quality 3-layer SympaTex performance fabric. Thanks to its material and shape, the neck protection prevents dirt and liquids from reaching the neck. Moreover, the neck protection itself is dirt- and water-proof, which makes it easy to clean. The neck protection can be attached via a simple clipping to the neck shell of the PROTOS®. BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workgear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

DESCRIPTION The PROTOS® Integral Safety Glasses are suitable for any head. Since the temple is length- and angle-adjustable, they can always match the size of the head. They can be adjusted individually and according to personal needs. Regulate the soft nose piece according to the nose width is also extremely easy. This ensures that the glasses are back-ventilated. Highest mechanical strength at extreme tempe­ratures according to EN 166:2002 is not a problem for the PROTOS® Integral Safety Glasses. This applies both to the visor and to the temples. Therefore, these glasses are extremely sturdy despite their light weight. In addition to stability, the glasses are also equipped with a protective UV filter according to EN 170:2003 as well as a sunscreen according to the standard EN 172:2002. Thus, the eyes do not risk being harmed by the invisible dangers of sunlight. 100% antifog (except colour #30), tested and approved according to EN 166/EN 172 (colour #30 & #60), and EN 166/EN 170 (colour #0 & #50). ADVANTAGES Glasses can be adjusted in inclination and length to provide the best possible setting Suitable for optical eyeglass lenses The nose bridge is movable, i.e. it can be set to nose size It can be pushed into the helmet shell with two fingers National and international patents and designs are pending and partially already granted. BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workgear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

DESCRIPTION The Torch Light is an LED safety lamp, which is mounted outside of the PROTOS®. This torch, which is not conductive, has been certified by DEKRA. In addition, it is explosion-proof according to ATEX zones 1 and 21. Thanks to a light flux of around 120 lumens, the lamp provides enough illumination for the majority of tasks. The torch light is mounted on the PROTOS® via a magnetic system. However, this system is also suitable for the belt clip.   Helmet mount 204076 & torch clip 204075 is required when fitting a torch light to your PROTOS® Integral helmet. IMPORTANT: Helmet mount 204076 fitted by PROTOS NZ

DESCRIPTION Helmet Torch Light Mount system.   PLEASE NOTE: Helmet mount 204076 & torch clips 204075 or 204045 are required when fitting a torch light to your PROTOS® Integral helmet. PROTOS® Torch Large – Complete System Lamp Holder (fits both left & right hand large torches) – Item 204075 PROTOS® Torch Large Left side – Item 204074 PROTOS® Torch Large Right side – Item 204078 PROTOS® Helmet Mount (fit left or right side) – Item 204076 PROTOS® Torch Mini – Complete System Lamp Holder (fits both left & right hand mini torches) – Item 204045 PROTOS® Torch Mini Left or Right side – Item 204044 PROTOS® Helmet Mount (fit left or right side) – Item 204076 IMPORTANT: Helmet mount 204076 fitted by PROTOS NZ

DESCRIPTION The Torch Light mini is an LED safety lamp, which is mounted outside of the PROTOS® Integral helmet. The PROTOS® Torch Light mini has 30 lumens and is waterproof to 100%. Furthermore, it is explosion-proof according to ATEX Zone 1 and DEKRA. The Maclip Light is mounted on the PROTOS® via a magnetic system. This system is also suitable for the belt clip.   Helmet mount 204076 & torch clip 204045 is required when fitting a torch light to your PROTOS® Integral helmet. IMPORTANT: Helmet mount 204076 fitted by PROTOS NZ

Compact 0.3Kg powder stored fire extinguisher. FEATURES Powder stored pressure extinguisher Conforms and tested to EN3 Certification powder stored pressure Extinguisher Suitable for use in Class A B & E fires only Overall Mass (full) is 0.64kg BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workwear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

Strong leather New Zealand made chainsaw mitt with riveted construction for extra strength FEATURES Strong leather & riveted construction Comfortable design Meets the forestry requirements for commercial chainsaw operators One size fits all Made with 4 mm soft handle “veg tan” grade leather New Zealand made BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workwear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

TIP WEDGE REPLACEMENT FOR VALFAST Replacement wedge tips for ValFast & ValFix To replace the tip, simply move the ValFast apart (pull the sheets apart) and remove the old tip from the aluminum block with a punch.

VALFAST BAST-ING MECHANICAL WEDGE 26T ValFast – in a new design! The robust spindle wedge with which the strenuous and time-consuming wedging of trees is a thing of the past. Designed so that you can leave your axe or sledgehammer at home. Optimized for use with an impact wrench, but it can also be operated with a ratchet at any time…. TECHNICAL DATA AT A GLANCE: Lifting capacity: 26t (breaking force >40t) Wedge angle: 14° Weight: 6.0kg Max. Impact wrench power 1630Nm (recommended minimum 1000Nm) Height/Width/Length: 103/180/460mm Wrench size: 24mm SUITABLE IMPACT WRENCH TYPES: Makita DTW1002 & DTW1001 & Makita TW001G Milwaukee ONFHIWF12 & ONEFHIWF34 Bosch GDS18V-1050H DeWalt DCF899   Talk to us about a demo unit

The ValFix is ​​the newest, lightest, cheapest spindle wedge on the market and another real BaSt-Ing innovation. With a dead weight of less than 1.4kg and a lifting force of over 15t, it generates more than 1000g (!) Lifting force per 1g of dead weight.  A secret of the ValFix is ​​that it works with a very flat wedge angle. Due to this small angle, it can be constructed particularly easily and still generate high lifting forces. Grease nipples on both threaded nuts ensure easy maintenance and sufficient lubrication even on long working days. The ValFix has a very low wedge angle of 10° degrees and therewith high lifting capacity and low weight. Important is that the socket is always completely on the 10mm hex. For smaller trees (below 25cm), there is a risk of touching the breakline of the tree with the tip of the wedge. The ValFix may be operated with a maximum 650 Nm impact wrench. TECHNICAL DATA AT A GLANCE: Maximum lifting capacity 15t Low wedge angle of 10° No axial bearing required due to the principle Low weight of 1.4kg Length/Width/Height: 330/135/50mm Easy lubrication using a grease nipple (no grease spray required) Max torque impact drive 650Nm Tip: With the right choice of impact wrench, it can also be used for the grinder as well as for the depth gauge grinder. e.g. Bosch GDX 18V-200

VALQUICK BAST-ING CONE WEDGE he cone wedge “ValQuick” is the useful supplement to the ValFast when used with an impact wrench.It is ideal for cutting trees that require little lifting power or to easily and quickly release jammed chainsaws.In addition, it can be used to add value to the ValFast. The ValQuick is designed to be easy and uncomplicated in the belt. ITEM 106100

Waterproof Boot Guards *Brushed Tricot with an open design for a comfortable fit *Cotton drill comfort lining with PVC backing for added strength *Elasticated ankle cuff   BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workwear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

A great way to protect and store height safety equipment. The kit bag features a breathable insert, draw strap and carry strap. Product Detail Model Size Weight (g) Dimensions Material ZKB Up to 10 Years 205g 550 x 270mm diam Polyesternylon