Bast-Ing

BAST-ING LOG TAPE REPAIR PADS 24 BaSt-Ing is the inventor of a specially developed adhesive tape to repair forestry tapes easily and permanently. The tape impresses with its high adhesive power, very high tear strength, UV resistance and water resistance. Damaged areas on forest measuring tapes are reinforced with the adhesive tape, which prevents subsequent tearing off. Torn off forestry measuring tapes are permanently reconnected with the adhesive tape.The repair of the measuring tapes can be done directly in the forest, without costly riveting. 24 Adhesive Pads ITEM 700072

DRILL FAST BAST-ING AUGER KIT 60MM WITH VALLINK FOR MILWAUKEE The DrillFast is the first impact driver drill bit and another genuine BaSt-Ing innovation.The DrillFast is powered by high-performance impact wrench as used in the ValFast. The DrillFast is fixed via the already known ValLink. The DrillFast has a sturdy bearing, so that no transverse or longitudinal forces act on the impact screw. DUE TO THE DRIVE WITH A STRIKING MECHANISM, THERE ARE MANY ADVANTAGES: No catching and turning of the auger possible Fast on loose ground – persistent on stony ground Low operating weight and easy handling No exhaust gases during use Typical application areas for the DrillFast are the setting of container plants and fence construction. The DrillFast is available in diameters 60 & 80mm. IN THE PRODUCTION OF THE DRILLFAST WE USE ONLY HIGH QUALITY MATERIALS: Hardened drill bit Thick-walled drill pipe made of quality steel Hardened hexagonal attachment with durable slide bearings Stainless steel as an abutment Kit includes: DrillFast 60mm Auger & ValLink suited for Milwaukee Drill ITEM 91108

ECOVAL BAST-ING SPINDLE WEDGE 12T Its robust, simple design makes it a valuable tool for harvesting wood. With the large wedge angle of 16 °, it achieves a sufficient lifting height even with thinner trees. The EcoVal is for smaller trees. It has a higher wedge angle and therefore lower lifting capacity but higher lifting height. Impacts machines up to 1000Nm. Important is that the enlarging cut of the tree goes smooth to the breaking line of the tree. Otherwise the wedge can be pushed out of the cut. TECHNICAL DATA AT A GLANCE: Lifting force: 12t Wedge angle: 16 ° Height 55mm Total length: 280mm Wedge width: 60mm Impact wrench max torque: 1000Nm

MAXVAL BAST-ING SPINDLE WEDGE 30T MaxVal – is the largest spindle wedge in the range and is specially designed for thick wood. The design of the MaxVal focuses on maximum lifting power and simple construction. The drive spindle is made of 32mm thick CrMo steel. The MaxVal is driven with a 24mm wrench size. The drive spindle is partially integrated in the MaxVal, which means that half of the spindle is protected in the wedge tip. The second, shorter half of the locker protrudes 140mm from the felling wedge. TECHNICAL DATA AT A GLANCE: Lifting capacity: 30t Wedge angle: 14° Weight: 6.2kg Impact wrench from 1000Nm Maximum torque impact drive 2000Nm Overall Length: 520mm,Wedge Length 330mm, Wedge Width: 80mm, Total width: 130mm Lifting height: 80mm Width across flats: 24mm Spindle diameter: 32mm Spindle material: CrMo – steel – highly tempered Thread pitch: 6mm SUITABLE IMPACT WRENCH TYPES: Makita DTW1002 & DTW1001 & Makita TW001G Milwaukee ONFHIWF12 & ONEFHIWF34 Bosch GDS18V-1050H DeWalt DCF899 Talk to us about our demo and hire units

MINIFIX BAST-ING THRUST CONE WEDGE 2-3T With the MiniFix, we are proud to be able to offer you a worldwide new felling wedge concept. The wedge pulls itself into the saw cut by means of the conical wedge. In contrast to conventional conical wedges, the lifting force is brought into the tree via an aluminum wedge. This design generates significantly more lifting force than conventional tapered wedges, while at the same time being simple and robust. The MiniFix is for supporting the ValFix. The lifting capacity depends on the strength of the wood. When the wedge reaches the max capacity the spindle breaks the wood out of the tree. Ideally suited to bring down trees with a small back slope quickly and safely. The lifting force of the ValFix can be increased by using the MiniFix as well.When repositioning the ValFix, the MiniFix is ​​used to support the tree. Due to the tree shape of the MiniFix, the MiniFix also pulls itself into a closed saw joint to quickly and easily free a jammed chainsaw if necessary. TECHNICAL DATA AT A GLANCE: Weight: 1.4kg Length: 280mm Maximum torque 700Nm on the 10mm hex Maximum torque 1700Nm on the 24mm hex The MiniFix has a 10mm drive and a 24mm drive. It can therefore be used in combination with ValFix and ValFast. ITEM 700070

VALFAST BAST-ING MECHANICAL WEDGE 26T ValFast – in a new design! The robust spindle wedge with which the strenuous and time-consuming wedging of trees is a thing of the past. Designed so that you can leave your axe or sledgehammer at home. Optimized for use with an impact wrench, but it can also be operated with a ratchet at any time…. TECHNICAL DATA AT A GLANCE: Lifting capacity: 26t (breaking force >40t) Wedge angle: 14° Weight: 6.0kg Max. Impact wrench power 1630Nm (recommended minimum 1000Nm) Height/Width/Length: 103/180/460mm Wrench size: 24mm SUITABLE IMPACT WRENCH TYPES: Makita DTW1002 & DTW1001 & Makita TW001G Milwaukee ONFHIWF12 & ONEFHIWF34 Bosch GDS18V-1050H DeWalt DCF899   Talk to us about a demo unit

The ValFix is ​​the newest, lightest, cheapest spindle wedge on the market and another real BaSt-Ing innovation. With a dead weight of less than 1.4kg and a lifting force of over 15t, it generates more than 1000g (!) Lifting force per 1g of dead weight.  A secret of the ValFix is ​​that it works with a very flat wedge angle. Due to this small angle, it can be constructed particularly easily and still generate high lifting forces. Grease nipples on both threaded nuts ensure easy maintenance and sufficient lubrication even on long working days. The ValFix has a very low wedge angle of 10° degrees and therewith high lifting capacity and low weight. Important is that the socket is always completely on the 10mm hex. For smaller trees (below 25cm), there is a risk of touching the breakline of the tree with the tip of the wedge. The ValFix may be operated with a maximum 650 Nm impact wrench. TECHNICAL DATA AT A GLANCE: Maximum lifting capacity 15t Low wedge angle of 10° No axial bearing required due to the principle Low weight of 1.4kg Length/Width/Height: 330/135/50mm Easy lubrication using a grease nipple (no grease spray required) Max torque impact drive 650Nm Tip: With the right choice of impact wrench, it can also be used for the grinder as well as for the depth gauge grinder. e.g. Bosch GDX 18V-200

VALQUICK BAST-ING CONE WEDGE he cone wedge “ValQuick” is the useful supplement to the ValFast when used with an impact wrench.It is ideal for cutting trees that require little lifting power or to easily and quickly release jammed chainsaws.In addition, it can be used to add value to the ValFast. The ValQuick is designed to be easy and uncomplicated in the belt. ITEM 106100