Clogger

CERTIFICATIONS:Certified to exceed the EN ISO 17249 Class 2 standard (24 m/s)SUMMARY:The Gen2 Clogger Altitude is designed to be the ultimate boot for work in spikes / spurs. Built with a rigid shank and ultra tough outer for a long life in tough conditions. OUT OF STOCK:Some sizes are temporarily sold out. New stock arrives early 2025. Thank you for your patience! Please check back later. The all-new Clogger arborist chainsaw boot is designed to provide the ultimate answer to working in spurs / spikes. The rigid insole creates the ultimate work platform. The Altitudes do take some time to break in. Click here for instructions. If you take the time to work the boot in, the Gen2 Altitudes will become your favorite boot with extreme durability giving you a long life in the toughest conditions. Chainsaw resistant upper lining in accordance with EN ISO 17249: 2014 Class 2, certified to 24 m/s. Safety toe in accordance with EN ISO 20345, Class I. Antistatic (A). Energy absorbent heel (E). Puncture resistant midsole (P). Water resistant upper (WRU). Fuel oil resistant outsole (FO). Slip resistant (SRA). Uses durable brushed 2.4-2.6 mm Nubuck leather uppers to help the boot hold its shape over time, a soft leather lined cuff for better comfort and a high rubber rand for extra wear resistance. Lightweight design at just 1.17 kg (Size 43 boot). Features AquaStop permeable layer that is waterproof but is fully breathable to reduce moisture build up. Includes a deep 3D lining to provide a comfortable experience, prevent wear points and offer additional ventilation. A stainless steel reinforced insole for better rigidity in trees when using spurs /spikes with a Kevlar anti-perforation layer added for additional protection. Shank construction incorporating a 8.0-12.0 mm layer of rubber added at the ideal density of 700-950 N/m3 to provide a comfortable foot board for long work days. Ultra rugged,Vibram Teton rubber outsole for designed to allow the boot to fit in narrow branch forks and formulated to be sticky in the tree but hard wearing on ground. Multi-zone lacing system for a fast and secure fit with rugged, corrosion resistant hardware using ball bearing loops on the lower zone and double riveted speed hooks on the mid and upper zones.    Developed in New Zealand and Italy. Italian made.   Clogger Altitude Gen2 Rugged Arborist Chainsaw Boots Size Chart Size EU NZ/AU US 36 3.5 4 37 4 5.5 38 5 6.5 39 6 7 40 6.5 7.5 41 7.5 8 42 8 9 43 9 10 44 10 11 45 10.5 12 46 11 13 47 12 14 48 13 15 49 14 16

Whether you are climbing, in a bucket or on the ground, this FR arm protector gives you light, cool and comfortable protection from your elbow to your wrist. Now with an new ultra secure stretch thumbhole cuff.   Hand and arm injuries are common from simple scrapes to chainsaw injuries. The new Clogger FR arm protector is designed to be light, breathable and flexible for complete freedom of movement.  The latest version is designed to protect your arm from the elbow to the wrist with a new elastic thumbhole cuff for a secure fit. All components are FR and the outer is arc-rated for use in wildfire and line clearance where there is a risk of exposure to fire or arc flash.  Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. Protective sleeve in housed in a super tough stretch Gen3 FR outer for extended life and a soft FR lining. Includes a new stretch thumbhole FR cuff to prevent twisting and provide a secure fit so that protective coverage is held in place giving wrist to elbow coverage.  Tree people specific detail Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection. Incorporates an elbow strap with a Velcro fastening giving the option of tightening to keep saw dust and debris out or leaving open for maximum ventilation. Options Sold individually (as left/right singles) - buy a left and right arm protector to get a pair.  Size: S-L. Variant We also offer non FR arm protectors. Safety Warning Like all Clogger products, the availability of Clogger arm protectors is not intended as an endorsement of unsafe practices but as the last line of defense to prevent potential injuries.   Designed and Made in Invercargill, New Zealand

SUMMARY:Arcmax FR chainsaw chaps are the ultimate FR chaps - fully fire resistant but also light and comfortable. CERTIFICATIONS:Certified by Bureau Veritas NZ Ltd to the Australian and New Zealand standard, AS/NZS 4453.3:1997 (20 m/s chainspeed). Arc-flashes or accidents involving fire can cause horrific burns or even be fatal. To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric. Clogger’s Arcmax Gen3 range features the new ultra tough FR outer which is 60% tougher for an extended life and has a 11 cal arc rating for more protection. Arcmax just went next level. Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. All components fire resistant, including outer fabric, chainsaw protective fabric and lining. Tough FR outer with a 60% higher tear strength for extended life. Tree people specific detail Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection. 50mm FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010. 50mm wide belt with quick release buckle. The adjustable waist extends to 125cm. An additional 45cm extension belt is available if required. Weight Lightweight design, just 1.1kg (Medium). Options Protection: Apron style or 360 calf wrap for additional protection. Fit: Unisex. Size: S-L.   Note: This product is not intended for grinding and welding applications.   Designed and made in Invercargill, New Zealand.  

CERTIFICATIONS: Certified by Bureau Veritas NZ Ltd to the Australian and New Zealand standard, AS/NZS 4453.3:1997 (20 m/s chainspeed). WHY WE MADE THIS: Designed for the occasional chainsaw user, C8 chainsaw chaps are an affordable way to stay safe with protection designed to meet the highest standards. CHAP STYLES: C8 Chaps come in 2 styles - zipped with full leg zips and trouser which pulls over your leg. C8 Chainsaw Chaps are designed for people who don't use a chainsaw everyday but looking to stay safe. With C8s, you get all the critical protection that you need at an affordable price with tough components to ensure a long life. Even if you are a casual user, you always need to be protected and comfortable. An accident can happen really fast, and can change your life! The zipped model fastens with the full length leg zip making it very easy to take on and off. Chainsaw protection Constructed with 6 layers of Arrestex chainsaw fabric. Waist to ankle coverage. Outer construction and design Split front design for increased freedom of movement. 600 denier strong polyester outer with water resistant PU coating and rugged oxford weave for durability. 50mm wide belt with quick release buckle. The adjustable waist extends to 125cm. An additional 45cm extension belt is available if required. Soft polycotton lining for extra comfort. Tree people specific detail Suitable for the occasional chainsaw user. Options Protection: Apron style. Fit: Unisex. Size: S - L. Variant C8 trouser leg style. Designed and Made in Invercargill, New Zealand

Designed for tree workers working on the ground, these Chaps are designed to be tough enough to withstand everything from blackberry to mud while still being light and comfortable to wear. CERTIFICATIONS: Certified by Bureau Veritas NZ Ltd to the Australian and New Zealand standard, AS/NZS 4453.3:1997 (20 m/s chainspeed). Strength re-engineered. DefenderPRO tough chainsaw chaps bring together the latest in technical fabric and design to redefine long lasting and rugged. The outer fabric is constructed from a new grade of specially developed nylon, increasing cut and abrasion resistance. Added to this is an oil and water resistant coating. DefenderPRO chaps are tough. They are practical. They are ready to defend. The Arborist Edition includes 360 degree calf protection for extra safety. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with 360 calf wrap for additional protection. Outer construction and design 1,000 denier, high-tenacity nylon outer covering with oil and water resistance. Soft poly-cotton lining. 50mm wide belt with quick release buckle. The adjustable waist extends to 125cm. An additional 45cm extension belt is available if required. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable and an ultra-secure, safe fit. Tough buckles designed for long life and to withstand crushing. Distinctive orange lower leg panel. Options Protection: 360 calf protection. Fit: Unisex. Size: S - L. Variation Apron style zipped or clipped. Designed and made in Invercargill, New Zealand

Designed for ground tree crews and landscapers, these cool, lightweight chaps are made to provide a much more comfortable experience in warm conditions. CERTIFICATIONS: Certified by Bureau Veritas NZ Ltd to the Australian and New Zealand standard, AS/NZS 4453.3:1997 (20 m/s chainspeed).   A breath of fresh air in cool chainsaw chap design. Developed to protect not only against chainsaws but to reduce the heat buildup from physical exertion especially in hot environments. Zero chainsaw chaps are lightweight and breathable, adding protection rather than weight and helping you stay cool as the work becomes hot and heavy. Protection is now a breeze. These chaps are suitable for use with a hedgetrimmer.   Protection: Apron style. Fit: Unisex. Size: S-L. Designed and made in Invercargill, New Zealand