zero

The CAMP Safety Cobra 10 fall arrester is designed for vertical but also horizontal and inclined use if combined with the Shock Absorber Rope (click here to view the product) during operations at height. Cobra 10 is retractable and connected to a swivel connector that allows the fall arrester to follow the user's movements. The cable is made of galvanized steel and designed to stretch and retract at any time, up to a maximum length of ten meters. Its breaking load is 12 kN. The ABS protective casing offers a high level of protection. The lanyard Art. 50301.01 Shock Absorber Rope must be purchased separately.

ZERO TETHER ANCHOR   The Tether by ZERO® is a safe secure diversionary anchor point for metal roofing applications. The Tether is designed as a diversionary anchorage point for total restraint application. The device gives the operator a 360 degree unhindered working area up to the roof edge whilst retaining a restraint position. The Tether can be used on metal clad roofs fixing directly to the metal surface with a minimum of x3 recommended roof screws and can also be used on trim deck roofs.    

Triple lock D shape carabiner. Reliable auto locking with high strength. Marked with individual serial numbers.

A Simple and effective primary anchor for access onto sheet metal roofs, the ZERO® Anchor-to-Go has interlocking cam clamps to secure the anchor to the edge of the roof sheeting (in the gutter line). This fast setup makes the Anchor-to-Go perfect for plumbers, painters, service technicians and installer that require short term roof access. By attaching a rope line to the anchor with a snap hook or carabiner and placing it over the ridgeline, access can is made from the opposite side of the roof allowing secondary diversionary anchors to be installed. Product Detail Model Size Weight (g) Dimensions Material AAP000M Up to 10 Years 3700g 49 x 50cm Powder coated steel Features   Downloads Rated for one person (15kN). Does not require any fixings. 0.42mm minimum roof thickness. Steel construction. 2x Cam clamp fixing points. Non-scratch cap. Fall arrest and work restraint use. For temporary use only.

Zero Apex Helmet Bag  The ZERO Apex Safety Helmet Bag is a soft padded bag made to protect the ZERO Apex X2 Vented Safety Helmet when being transported. The zip up ZERO Apex Safety Helmet Bag holds helmet complete with accessories. Zip up bag Protects helmet and accesories in pack or when being transported Name tag for easy identification Helmet protection bag for Zero Apex X2 Vented Multi-Impact Helmet (NZSB : 465255)    

Direct fit for Apex X2 vented helmet : 465255

The APEX X2 is a second-generation multi-impact tested helmet that truly looks and performs as an industrial helmet. The X2 has a durable lightweight vented shell, which allows air to flow through the helmet while the front and rear height adjustable headband provides a secure and comfortable fit. Multiple direct-fit configurations are available including visors, protective visor covers (with headlamp attachment), integrated Cap-Attach slots for hearing protection & face visor assemblies.

The ZERO Apex X2 Visor Protector protects your ZERO Apex X2 Safety Helmet Visor from scratches when in use.    It is installed directly on the ZERO Apex X2 Visor quick mounts and comes equipped with a mounting slot that is compatible with most headlamps. Prevents Apex X2 Visor range from scratching Quick clip system ensure simple attachment and removal Compatible with ZERO Apex X2 Vented Safety Helmet (NZSB : 465255) For use to protector Clear and Smoke Visor (NZSB : 465258)

The ZERO Apex X2 Safety Helmet Visor is a half face clip on visor designed for use with the ZERO Apex X2 Vented Safety Helmet.   Made from a scratch-resistant polycarbonate they attach using quick connect mounts that are supplied with the visor. Visor easily and quickly attach via quick connect mounts (supplied with visor) Anti-fog and scratch resistant Panoramic lens compatible for overlapping corrective glasses Multi-height adjustment Compatible with ZERO Apex helmets. (X2 ZAX201 / ZAXS01 / ZAX2E01). Optical Class; 1 (No optical distortion, suitable for permanent wear) Protective visor protector sold separately (ZX2AVP / NZSB : 465259)

Built to mountain engineering certification, the Apex Multi Pro helmet is built to last and has provision for all the standard accessory types that are needed on the job.   Size adjustment system. 10 air intakes with mesh vents. Replaceable Inner lining fully detachable and washable. External Nylon 6.6 Head lamp holder clips 6 point internal harness. Two slots for mounting ear defenders. Non-releasing chin strap. Reflector stickers. Full face visor is via side attachment slots only.

Designed to take on a multitude of vertical applications. The BlockMax2 is built with a heavy-duty thermoplastic housing and incorporates a 5mm steel rope that will self lock in the event of a fall and an energy absorption system located near the snap-hook to rapidly reduces energy for added protection. Setting up the BlockMax2 is simple with the swivelling anchorage point and self-locking snap hook.

The BlockMaxR2 is a retractable type 3 fall arrest and rescue device equipped with a hand-operated winch with an automatic brake that prevents uncontrolled descent and the ability to recover in the case of an emergency. Ideal for vertical arrangement or tripod for rescue capability, the BlockMaxR2 is housed with a durable metal casing and a 5mm steel rope that will self lock in less than 0.8m in the event of a fall. The SRL is completed with a self-locking snap hook for a fast and secure connection to the user.

CAMP Tooler tool holder rope work at height is designed to ensure the equipment you use (maximum 10 kg) when you are on the rope. Tooler is built with retractable elastic webbing with a minimum length of 85 cm and a maximum length of 120 cm. The tools can be connected via a throttle knot made on the special cord, which can then be locked using the plastic cord lock. The connection to the harness takes place via the aluminum alloy snap hook.

The ZERO® Construction Plus is the complete Kit for the construction site. From temporary anchorage to EWP’s, this kit is designed for comfort and durability over long periods of work. The kit including the 3D moisture-wicking Tradesman Harness from our ZERO® Plus range, our advanced ZERO® Pinnacle Exo multi-impact tested helmet, the Logix self retracting webbing lifeline and the ZERO® Tradesmate adjustable webbing lanyard. The kit is completed with a webbing sling, carabiners and packaged in our heavy-duty ventilated kit bag.   ZERO CONSTRUCTION KIT Multi-purpose height safety kit SKU: SKP301 Overview The ZERO® Construction Plus is the complete Kit for the construction site. From temporary anchorage to EWP’s, this kit is designed for comfort and durability over long periods of work. The kit including the 3D moisture-wicking Tradesman Harness from our ZERO® Plus range, our advanced ZERO® Pinnacle Exo multi-impact tested helmet, the Logix self retracting webbing lifeline and the ZERO® Tradesmate adjustable webbing lanyard. The kit is completed with a webbing sling, carabiners and packaged in our heavy-duty ventilated kit bag.   FIND A RETAILER BECOME A DISTRIBUTOR Sizes Rating Life Span Certifications         Product Detail Model Size Weight (g) Dimensions Material SKP301SML SML SKP301UNI UNI SKP301XXL XXL Features   Downloads Kit includes: ZERO® Tradesman multi-purpose harness (HTP0017). ZERO® Pinnacle Exo multi-impact tested helmet (ZPE01). ZERO® Logix self-retracting webbing lifeline (LLRZ0W5). ZERO® TradeMate adjustable webbing lanyard (LTZ0WX3). 2x ZERO® Ox Screw carabiners (PJ501). ZERO® 150cm Webbing Sling (ASP000W/015). ZERO® Ventilated Kit Bag (ZKB).

ZERO Aluminium Tripod  The Zero Aluminium Tripod is a multifunctional power package on three legs. It is ideal for lifting loads, assisting in access to confined spaces, as well as for securing and rescuing people. Easy to use, the tripod offers complete safety without having to be anchored to the ground. The head is aluminium alloy with four attaching points and includes pulley. Zero Tripod wire winch, full body harness and spreader bars are available to complete a confined space kit, extras are not included with the tripod and are priced separately. Features Adjustable length legs and chain webbing between legs. Rubber pads on feet to assist in stability. Supplied complete with Tripod PVC carry bag. Rated to 500kg Confined space working area: 140cm – 213cm Dimensions when folded:172cm x 23cm x 23cm Weight: 16.5kg