HEIGHT SAFETY

The CAMP Safety Cobra 10 fall arrester is designed for vertical but also horizontal and inclined use if combined with the Shock Absorber Rope (click here to view the product) during operations at height. Cobra 10 is retractable and connected to a swivel connector that allows the fall arrester to follow the user's movements. The cable is made of galvanized steel and designed to stretch and retract at any time, up to a maximum length of ten meters. Its breaking load is 12 kN. The ABS protective casing offers a high level of protection. The lanyard Art. 50301.01 Shock Absorber Rope must be purchased separately.

CAMP Tooler tool holder rope work at height is designed to ensure the equipment you use (maximum 10 kg) when you are on the rope. Tooler is built with retractable elastic webbing with a minimum length of 85 cm and a maximum length of 120 cm. The tools can be connected via a throttle knot made on the special cord, which can then be locked using the plastic cord lock. The connection to the harness takes place via the aluminum alloy snap hook.

The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations. Boasting a minimum breaking strength of 15kN, the range has been developed to be a durable and efficient temporary roof line anchor system. An affordable temporary and reusable alternative to installation of a permanent purlin style anchor Compact design and lightweight materials provide a tried and tested safety solution Rated for up to a 140kg user Can withstand fall arrest forces up to 15kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load) The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only) Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists. Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4) Provides safe 360 degree work area For use on metal or tile roofs 500mm used for Trimdeck or Custom Orb roofs Conforms to ASNZS 1891.4 requirements

LINQ Essential harness H101 RKRG015SHK1 Kernmantle rope 15m with rope grab and thimble eye, permanently attached shock absorber HSASE2515 Anchor Strap Endless 25mm - 1.5M KSGA18 Screw Gate Karabiner  

1.85M Elasticated Lanyard WLE2- Double Leg Elasticated Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 140kg including tools and equipment. Drop forged lanyard hardware Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength. Unique THETA stitch pattern has 313 stitches resulting in a strength that matches the lanyards webbing strength. Australian designed, engineered, and MADE. Webbing Tenacity= 23kN. Webbing is UV rated to meet AS/NZS 1891.5:2020 standard THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.5 SN - Snap Hook SD - Scaffold Hook Double Action Steel Alloy 68mm

2M Webbing Lanyard WLO2- Double Leg Webbing Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 150kg including tools and equipment. Drop forged lanyard hardware Unique THETA stitch pattern has 313 stitches resulting in a strength that matches the lanyards webbing strength. Australian designed, engineered, and made. Webbing Tenacity = 28kN. THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.5 SN - Snap Hook SD - Scaffold Hook Double Action Steel Alloy 68mm

2M Webbing Lanyard WLO2- Double Leg Webbing Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 150kg including tools and equipment. Drop forged lanyard hardware Unique THETA stitch pattern has 313 stitches resulting in a strength that matches the lanyards webbing strength. Australian designed, engineered, and made. Webbing Tenacity = 28kN. THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.5 SN - Snap Hook

Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment Liqui-Pel Technology for liquid protection, also easier to clean the harness High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation Retro-Reflective Thread in webbing for improved visibility in low light Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use Padded Legs for force dispersion at moment of fall impact Confined Space Rescue Loops Adjustable Waist Belt with tool loop attachments Service Pouch on back 10 year life span from date of manufacture

Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment Liqui-Pel Technology for liquid protection, also easier to clean the harness High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation Retro-Reflective Thread in webbing for improved visibility in low light Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use Padded Legs for force dispersion at moment of fall impact Confined Space Rescue Loops Adjustable Waist Belt with tool loop attachments Service Pouch on back 10 year life span from date of manufacture

Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment Liqui-Pel Technology for liquid protection, also easier to clean the harness High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation Retro-Reflective Thread in webbing for improved visibility in low light Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use Padded Legs for force dispersion at moment of fall impact Confined Space Rescue Loops Quick Release Buckles. Padding under buckles Service Pouch on back 10 year life span from date of manufacture

Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment Liqui-Pel Technology for liquid protection, also easier to clean the harness High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation Retro-Reflective Thread in webbing for improved visibility in low light Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap Comes with Suspension Trauma Strap: One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use Padded Legs for force dispersion at moment of fall impact Confined Space Rescue Loops Quick Release Buckles. Padding under buckles Service Pouch on back 10 year life span from date of manufacture

1.85M Elasticated Lanyard WLE1- Single Leg Elasticated Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 140kg including tools and equipment. Drop forged lanyard hardware Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength. Unique THETA stitch pattern has 313 stitches resulting in a strength that matches the lanyards webbing strength. Unique stretchable lanyard design that minimises length of lanyard, preventing tripping or snagging. Australian designed, engineered, and made. Webbing Tenacity= 23kN. Webbing is UV rated to meet AS/NZS 1891.5:2020 standard THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.5 SN - Snap Hook SD - Scaffold Hook Double Action Steel Alloy 68mm

2M Webbing Lanyard WLO1- Single Leg Webbing Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 150kg including tools and equipment. Drop forged lanyard hardware Unique THETA stitch pattern has 313 stitches resulting in a strength that matches the lanyards webbing strength. Australian designed, engineered, and made. Webbing Tenacity = 28kN. THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.5 SN - Snap Hook SD - Scaffold Hook Double Action Steel Alloy 68mm

2M Webbing Lanyard WLO1- Single Leg Webbing Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 150kg including tools and equipment. Drop forged lanyard hardware Unique THETA stitch pattern has 313 stitches resulting in a strength that matches the lanyards webbing strength. Australian designed, engineered, and made. Webbing Tenacity = 28kN. THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.5 SN - Snap Hook

INQ Essential harness H101 RKRG015SHK1 Rope kernmantle with thimble eye & rope grab. 15M with permanently attached shock absorbing 450mm assembly and screw gate karabiner HSASE2515 Anchor Strap Endless 25mm - 1.5M x 1 KSGSA18 Screw Gate Karabiner x 1 450mm Shock Pack Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN An exclusive Extended Length Energy Absorber (ELEA) designed to protect a workers, of up to 160kg, tools and equipment Pebble weave webbing provides maximum grip precluding incidental buckle slippage Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact Retro-reflectivity built into webbing 160kg wearer capacity (combined weight of wearer, clothing and tools) when used in conjunction with LINQ shock absorbing lanyard Articulated chest and shoulder straps adjustment points designed for female wearers Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance Unique to LINQ - Green for safely locked - Red for not locked feature / indicator Weight 165gm Rated to 25kN Opening 18mm Made from Steel Alloy Kit Bag (HSKB710) x 1