HEIGHT SAFETY

The new ZERO Pinnacle ZERTEC features Koroyd welded tubes which crush uniformly on impact, reducing the risk of injury. The Pinnacle Zertec provides true multi-impact protection, making it ideal head protection for work at heights. Versatile and rugged includes slots for cap attached ear protectors and capacity for direct fit visors. Light and comfortable helmet with an attractive design, designed for electrical, linesman, industrial, construction, work at heights, arborist and abseil use: particularly where there is a risk of electric shock or arc flash. The helmet is also rated for molten metal splash and lateral deformation. Includes mountaineering impact and electrical insulation certifications ensuring the ** helmet meets the new regulations for work at heights, the electrical industry as well as applications where the chin strap must not be releasable.  BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workwear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

The ZERO® Roofer Kit is popular with workers who carry out general roof or plant maintenance where a permanent safety line system is not in place. The Utility ZERO® harness provides fall arrest support with front and back attachment points and the Ventura rope line with a built-in ZERO® energy absorption system and self-locking rope grab can adjust to any length for ease of access. The kit is completed with a webbing sling, carabiner and packaged in our ZERO® backpack.  

The ZERO® Roofer Plus Kit is our most popular kit with tradespeople who carry out work on domestic and commercial structures. Designed for comfort and durability over long periods of work, the Roofer Plus Kit provides all you need to stay protected including the 3D moisture-wicking Tradesman Harness from our ZERO® Plus range, our advanced ZERO® Pinnacle Exo multi-impact tested helmet and the Ventura rope line with a built-in ZERO® energy absorption system and self-locking rope grab. The kit is completed with a diversionary anchor plate, webbing sling, carabiner and packaged in our heavy-duty ventilated kit bag. Product Detail Model Size Weight (g) Dimensions Material SKP102SML SML SKP102UNI UNI SKP102XXL XXL Features   Downloads Kit includes: ZERO® Tradesman Multi-purpose harness (HTP0017). ZERO® Pinnacle Exo multi-impact tested helmet (ZPE01). ZERO® 15m Ventura Linostop with adjuster (RV20RX3/150). ZERO® Tether diversionary anchor plate (ATD000M). ZERO® Ox Screw carabiner (PJ501). ZERO® 150cm Webbing Sling (ASP000W/015). ZERO® Ventilated Kit Bag (ZKB).  

ZERO SCAFFPRO DOUBLE ELASTICATED LANYARD W/ SNAPHOOKS & SCAFF HOOKS 2M Measurements 0.27x0.21x0.12meters 0.006804m3 1.66kg

PRODUCT DESCRIPTION ZERO Spark Lanyard for Hot Works LSZRFX5 This ZERO Spark Lanyard made from Aramid rope for hot works like grinding and metal cutting. Resistant to flame, the rope is protected against sparks, molten metal drops etc.  European quality. Features of the ZERO Spark Lanyard for Hot Works: Aramid Rope with polyamide core for hot works Includes shock absorber with protective fabric cover The shock absorber will tear to absorb the energy in the event of a fall Standard simple lanyard for attachment to anchor points Shock absorber end connects to the fall arrest point on the harness Snaphook and scaffhook rated to 20kN Do not remove the yellow cover as this protects the shock absorber from environmental damage At ZERO Height Safety (NZ/AU) Limited, committed to minimizing our environmental impact and promoting sustainable practices throughout our operations. 100% New Zealand owned & operated

Resistant to sparks, flame and metal splash, the SparkPro is a twin-tailed lanyard made from 11.4mm aramid rope for hot works like grinding and metal cutting. Designed for continuous 3-point connection to reduce the risk of a fall, the twin-tails can be easily be adjusted to 1.2m to protect the user from a fall. The ZERO® energy absorption system rapidly reduces energy in a fall and includes a heat-shield cover to protect from heat and sparks.   Sizes 1.2 - 2M Rating 100kg Life Span - Up to 10 Years Certifications          

Ideal for working from single anchorage points including elevated work platforms and continuous fall protection systems, the Stretch single elasticated lanyard integrates a high tensile steel snap hook for simple connection to the harness and a choice of either a snap hook or scaffold hook anchorage connection. The ZERO® energy absorption system rapidly reduces energy in a fall and the heavy-duty cover protects the lanyard from environmental damage.   2.0 meter elasticated webbing lanyard. ZERO® energy asorbtion system. 1x snaphook harness connector (rated to 20kN). Hardware options: 1x snaphook ancorage connector (rated to 20kN) or 1x double action scaffold hook (rated to 20kN). Protective energy absorber cover. Permitted to work in potentially explosive areas.  

The TempLink is a temporary roof anchoring device that can be installed onto a metal or tile roof by simply utilising the existing roofing fixings. The Templink is perfect for plumbers, painters, service technicians and installers that require short term roof access where there are no permanent safety anchors. By attaching a rope line to the anchor with a snap hook or carabiner and placing it over the ridge line, access is made from the opposite side of the roof allowing secondary diversionary anchors to be installed.   Product Detail Model Size Weight (g) Dimensions Material TPLK Up to 10 Years 1050g Length 210cm Stainless Steel Features   Downloads Rated for one person (15kN). Multi-directional integral shock absorber. Requires 6x size 14-10 (hex head) roofing screws (Min 100mm spacing). Supplied with carry bag. Fall arrest and work restraint use only. For temporary use only.

Zero's Terrain safety helmet has been specially designed to high performance standards, meeting helmet requirements for common work activities as well as tough outdoor environments including work at height, industry, and head protection requirements for all-terrain vehicle users. The helmet has a high level of impact protection which gives the wearer excellent protection from impact/ shock both from above or from the sides (impact and penetration meet and exceed AS/NZS 1801) and integrated retractable visor for eye protection. The Terrain is tested to many different standards giving it the versatility to be used in a wide range of applications.   HOW IT'S CONSTRUCTED All-terrain vehicles (ATV) to 50 km/h on open road. Working at height/abseil/equestrian. Confined space/CBRN (chemical, bacteriological, radiological, and nuclear environments). Snowmobile/jetski/quad bike. Forestry & arborculture wildfire fire fighting. Maritime operations/RIBs/hovercraft. Branding customization is available to order. AS/NZS 1801 exceeds impact and penetration tests. Fully certified with vents closed. Vent covers are removable to increase airflow and ventilation.   OTHER FEATURES YOU'LL APPRECIATE Weighs 550g  Adjustable for head sizes between 52 - 64cm 10 year lifespan..   SAFETY STANDARDS EN397:2012 EN12492:2012 PAS 028:2005 EN1384:1997 BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workwear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

ZERO TRADEMATE SINGLE ADJUSTABLE WEBBING LANYARD W/ SNAPHOOKS & SCAFF HOOK 2M Measurements 0.27x0.21x0.12 meters 0.006804m3 1.3kg

The Tradesman fall arrest & restraint harness provides unrivalled comfort over long periods of work. Breathable padded panels on the back, shoulders, waist & legs disperse the load off pressure points keeping you focused on the task at hand. Moisture-wicking 3D mesh pads provide unrivalled shoulder and neck protection. Quick connect buckles make the TRADESMAN harness simple to fit and tool loops on the chest to keep tools handy. This is the ideal harness for serious tradesmen.   Front fall arrest attachment point. Rear fall arrest D-ring attachment point. Breathable rear panel padding and back straps keep the harness in shape ready for easy fitting. Quick connect buckles with chest and leg adjustments providing correct and secure fit. Extra wide, padded leg straps for added comfort when working for long periods. Wide angled padded shoulders with moisture-wicking 3D mesh pads, providing unrivalled shoulder and neck protection and comfort. Polyester webbing construction for durability and strength. Tool loops on the chest to keep tools handy. Fall indicators for continued safety inspections. Velcro covered labelling for long term inspections. Forged steel hardware. www.zeroheightsafety.com BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workgear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*  

ZERO Ventura linostop with adjuster – 15m Popular and effective ropeline for many types of work at height. Keeps the rope tight, so effectively working in restraint technique. The Ventura linostop comes with a rope line, rope adjuster, integral shock absorber and snap hook connections. Having a shock absorber in the setup means that you are protected to fall arrest at all times. Certified to AS/NZS 1891.3:1997. 20 metre variant. FEATURES Easy to adjust as you work down the rope, travels freely up the rope. Integrated shock absorber for safety protection. 12mm Kernmantle static rope. Excellent for roof work. Required to be fixed to a secure anchor. 5m, 15m, and 30m linostops are available.