Protos

DESCRIPTION No matter whether for structural, underground, or road constructions as well as canal and tunnel work or other industrial activities – when the head is in danger, the proper protection according to EN 397 is indispensable. The PROTOS® Integral Industry has been developed for these daily applications and beyond them. Unprecedented wear comfort and safety that surpasses all standards by far, protect the head better than ever. Thanks to the modular principle, the PROTOS® Integral Industry can also be upgraded for other missions at any time. A head protection for all application areas. SIZE One size (54-62) PATENTS AND DESIGN PATENTS EP Nr. 2 498 636EU design no. 1731167Swiss design no. 137 620US design pat. no. D677,006EP Patent No. 2 498 635EP design no. 1 974 528EP design no. 2012 101 489 Further national and international patents and designs are pending, in particular for the interior equipment. BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workwear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

DESCRIPTION The etch metal visor for the PROTOS® Integral fits precisely on the head protection. Through this fit, there are no protruding parts or cavities, in which branches and debris can get caught. Facial protection visor with 16/39 openings/cm2. Thanks to its special coating, sunlight reflection as well as the visor freezing temperatures below zero are prevented. SIZE One size PATENTS AND DESIGN PATENTS US patent no. 8,806,667   BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workgear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

DESCRIPTION The neck protection for the PROTOS® Integral is available in different colours. All variants of the neck protection for the PROTOS® Integral are made ​​of high-quality 3-layer SympaTex performance fabric. Thanks to its material and shape, the neck protection prevents dirt and liquids from reaching the neck. Moreover, the neck protection itself is dirt- and water-proof, which makes it easy to clean. The neck protection can be attached via a simple clipping to the neck shell of the PROTOS®. BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workgear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

DESCRIPTION The PROTOS® Integral Safety Glasses are suitable for any head. Since the temple is length- and angle-adjustable, they can always match the size of the head. They can be adjusted individually and according to personal needs. Regulate the soft nose piece according to the nose width is also extremely easy. This ensures that the glasses are back-ventilated. Highest mechanical strength at extreme tempe­ratures according to EN 166:2002 is not a problem for the PROTOS® Integral Safety Glasses. This applies both to the visor and to the temples. Therefore, these glasses are extremely sturdy despite their light weight. In addition to stability, the glasses are also equipped with a protective UV filter according to EN 170:2003 as well as a sunscreen according to the standard EN 172:2002. Thus, the eyes do not risk being harmed by the invisible dangers of sunlight. 100% antifog (except colour #30), tested and approved according to EN 166/EN 172 (colour #30 & #60), and EN 166/EN 170 (colour #0 & #50). ADVANTAGES Glasses can be adjusted in inclination and length to provide the best possible setting Suitable for optical eyeglass lenses The nose bridge is movable, i.e. it can be set to nose size It can be pushed into the helmet shell with two fingers National and international patents and designs are pending and partially already granted. BUYING GUIDES & RESOURCES Ordering in bulk? Call 0800 924 284 or email us at sales@kiwiworkgear.co.nz Buy your Workgear online from Kiwi Workgear, supplying New Zealanders from our small showroom with quality safety gear and fast, friendly service. *Not all products are available in store*

DESCRIPTION The Torch Light is an LED safety lamp, which is mounted outside of the PROTOS®. This torch, which is not conductive, has been certified by DEKRA. In addition, it is explosion-proof according to ATEX zones 1 and 21. Thanks to a light flux of around 120 lumens, the lamp provides enough illumination for the majority of tasks. The torch light is mounted on the PROTOS® via a magnetic system. However, this system is also suitable for the belt clip.   Helmet mount 204076 & torch clip 204075 is required when fitting a torch light to your PROTOS® Integral helmet. IMPORTANT: Helmet mount 204076 fitted by PROTOS NZ

DESCRIPTION Helmet Torch Light Mount system.   PLEASE NOTE: Helmet mount 204076 & torch clips 204075 or 204045 are required when fitting a torch light to your PROTOS® Integral helmet. PROTOS® Torch Large – Complete System Lamp Holder (fits both left & right hand large torches) – Item 204075 PROTOS® Torch Large Left side – Item 204074 PROTOS® Torch Large Right side – Item 204078 PROTOS® Helmet Mount (fit left or right side) – Item 204076 PROTOS® Torch Mini – Complete System Lamp Holder (fits both left & right hand mini torches) – Item 204045 PROTOS® Torch Mini Left or Right side – Item 204044 PROTOS® Helmet Mount (fit left or right side) – Item 204076 IMPORTANT: Helmet mount 204076 fitted by PROTOS NZ

DESCRIPTION The Torch Light mini is an LED safety lamp, which is mounted outside of the PROTOS® Integral helmet. The PROTOS® Torch Light mini has 30 lumens and is waterproof to 100%. Furthermore, it is explosion-proof according to ATEX Zone 1 and DEKRA. The Maclip Light is mounted on the PROTOS® via a magnetic system. This system is also suitable for the belt clip.   Helmet mount 204076 & torch clip 204045 is required when fitting a torch light to your PROTOS® Integral helmet. IMPORTANT: Helmet mount 204076 fitted by PROTOS NZ

TIP WEDGE REPLACEMENT FOR VALFAST Replacement wedge tips for ValFast & ValFix To replace the tip, simply move the ValFast apart (pull the sheets apart) and remove the old tip from the aluminum block with a punch.